|
HD6473434F16 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
HD6433434F16 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
HD64F3434FLH16 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
HD6433434TF12 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
HD64F3434TF16 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
HD6473434TF16 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
HD6433434TF16 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
HD64F3434TFLH16 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
AT24CS256W-10SC |
Atmel |
|
|
2-wire serial eeproms with permanent software write protect |
|
AT24CS256W-10SC-1.8 |
Atmel |
|
|
2-wire serial eeproms with permanent software write protect |
|
AT24CS256W-10SC-2.7 |
Atmel |
|
|
2-wire serial eeproms with permanent software write protect |
|
AT24CS256W-10SI |
Atmel |
|
|
2-wire serial eeproms with permanent software write protect |
|
AT24CS256W-10SI-1.8 |
Atmel |
|
|
2-wire serial eeproms with permanent software write protect |
|
HD64F3437FLH16 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
HD6433436TF12 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
HD6433436TF16 |
Hitachi Semiconductor |
|
|
12 V must not be applied to the S-mask model (single-power-supply specification), as this may permanently damage the device. |
|
RSB-24 |
ETC |
|
|
using permanent magnet, high sensitivity two poles signal relay rsb relayS |
|
RSB-24-S |
ETC |
|
|
using permanent magnet, high sensitivity two poles signal relay rsb relayS |
|
RSB-3 |
ETC |
|
|
using permanent magnet, high sensitivity two poles signal relay rsb relayS |
|
RSB-3-S |
ETC |
|
|
using permanent magnet, high sensitivity two poles signal relay rsb relayS |