关键词require
标准
为您共找出"500+"个相关器件
图片 型号 厂商 标准 分类 描述
Image: PCA9629A PCA9629A NXP Semiconductors 集成电路 接口 - 模块 the pca9629a is an i2c-bus controlled low-power cmos device that provides all the logic and control required to drive a four phase stepper motor.
Image: PCA9541A PCA9541A NXP Semiconductors 集成电路 接口 - 模块 the pca9541a is a 2-to-1 i2c-bus master selector designed for high reliability dual master i2c-bus applications where system operation is required, even when one master fails or the controller card is removed for maintenance
Image: 1210 1PSI 1210 1PSI TE Connectivity 传感器，变送器 压力传感器 the 1210 1psi is a temperature compensated,piezoresistive silicon pressure sensor packaged in a dual-in-lineconfiguration. It is intended for cost sensitive applications whereexcellent performance and long-term stability are required.
Image: SE-VS1002K SE-VS1002K Littelfuse Inc 机电产品 工业控件 In some SE-325 ngr monitor applications the required res trip level (vac) setting may be above the 20k res set-point range.
Image: AKT4R111100 AKT4R111100 Panasonic 测试和测量 控制器 - 处理，温度 operation startup can begin after using initial setting mode to enter the control values required before first use, and after entering values for items such as frequently used and frequently changed settings. smooth operation is enabled at initial startup and after changing settings.
Image: HF0516414 HF0516414 ETC 附件 机架热管理 click-fit design quickly installs into enclosure wall; no tools or screws required
Image: TPC11CAHM3/H TPC11CAHM3/H Vishay 电路保护 TVS二极管 TJ = 185 °C capability suitable for high reliability and automotive requirement
Image: TPC24CAHM3/H TPC24CAHM3/H Vishay Semiconductors 电路保护 TVS二极管 TJ = 185 °C capability suitable for high reliability and automotive requirement
Image: HBL5006XV2T1G HBL5006XV2T1G ON Semiconductor 电路保护 LED保护设备 the shunt device is also applicable to other loads where circuit continuity is required.
Image: IQS620-0-DNR IQS620-0-DNR Azoteq 传感器，变送器 近程传感器 the iqs620(A) proxfusion IC is a multifunctional capacitive, Hall-effect & inductive sensor designed for applications where any or all of the technologies may be required.
Image: IQS620EV04-S IQS620EV04-S Azoteq 传感器，变送器 近程传感器 the iqs620 proxfusion IC is a multifunctional capacitance, Hall-effect & inductance sensor designed for applications where any or all of the technologies may be required.
Image: L1IZ-0940000000000 L1IZ-0940000000000 Lumileds Lighting Company 光电子 红外线数据通信 the luxeon IR compact line is a product line of high power infrared emitters specifically designed for high efficiency as required in a small spaces.
Image: C0402C222J8JACTU C0402C222J8JACTU Kemet 无源元器件 电容器 the electronics industries alliance (eia) characterizes u2j dielectric as a class I material. components of this classification are temperature compensating and are suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required.
Image: C1206C473J5JACTU C1206C473J5JACTU Kemet 无源元器件 电容器 components of this classification are temperature compensating and are suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required.
Image: C0805C333J5JACTU C0805C333J5JACTU Kemet 无源元器件 电容器 components of this classification are temperature compensating and are suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required.
Image: C0805C563J3JACTU C0805C563J3JACTU Kemet 无源元器件 电容器 . components of this classification are temperature compensating and are suited for resonant circuit applications or those where Q and stability of capacitance characteristics are required.
Image: F6QA1G581M2QZ-J F6QA1G581M2QZ-J Taiyo Yuden 无源元器件 信号调节 the top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below.
Image: 387000176 387000176 Laird Technologies 热量管理 热电 the tunnel series teas are designed with a patented, high-performance cross flow technology that maximizes heat transfer when pulling air through a heat exchanger. the number of airflow paths required to operate is reduced when compared to traditional impingement flow teas
Image: 387000840 387000840 Laird Technologies 热量管理 热电 the tunnel series teas are designed with a patented, high-performance cross flow technology that maximizes heat transfer when pulling air through a heat exchanger. the number of airflow paths required to operate is reduced when compared to traditional impingement flow teas. this product series is offered in two heat transfer mechanism configurations:
Image: 387000872 387000872 Laird Technologies 热量管理 热电 the tunnel series teas are designed with a patented, high-performance cross flow technology that maximizes heat transfer when pulling air through a heat exchanger. the number of airflow paths required to operate is reduced when compared to traditional impingement flow teas.

©2000-  21IC电子网版权所有

京ICP备11013301号 京公网安备 11010802024343号